Ba0.4Sr0.6PbO3

ceramic
· Ba0.4Sr0.6PbO3

Ba0.4Sr0.6PbO3 is a mixed-cation perovskite oxide ceramic compound combining barium, strontium, and lead in a cubic perovskite crystal structure. This is a research-phase material studied for electrochemical and electroceramic applications, particularly in systems requiring specific ionic conductivity or dielectric behavior; it is not a standard commercial ceramic but belongs to the broader family of perovskite materials being investigated for advanced energy storage, catalysis, and solid-state device applications. The compositional flexibility of perovskite ceramics—allowing tuning of properties through A-site cation substitution—makes materials like this relevant for engineering applications where conventional oxides cannot meet combined requirements for thermal stability, ionic transport, or dielectric performance.

solid oxide electrochemistryperovskite research ceramicshigh-temperature electrodesionic conductor studiesenergy storage materials development

Compliance & Regulations

?Conflict Free?RoHS?REACH?TSCA?Prop 65
Units:
siimperial
PropertyValueUnitConditionsSource
Thermal Conductivity(k)2 entries
2.295
W/(m·K)—
↳
2.295
W/(m·K)27°C
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Verified Unverified Low confidence (<80%) Link to source
PropertyValueUnitConditionsSource
Electrical Conductivity(σ)
242.3
S/cm27°C
Electrical Resistivity(ρe)
0.0000413
Ω·m27°C
Thermoelectric Power Factor(PF)
0.000166
W/(m·K²)27°C
Seebeck Coefficient(S)
-82.77
μV/K27°C
Thermoelectric Figure of Merit(zT)
0.02170
-27°C
Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.