AZ91E Magnesium T6

Verifiedmetal

AZ91E is a cast magnesium alloy containing aluminum and zinc that is solution heat-treated and artificially aged to the T6 condition, providing improved strength and hardness compared to as-cast material. This alloy is used primarily in aerospace and automotive applications where lightweight castings with moderate strength and acceptable corrosion resistance are required, with typical service limited to temperatures below 120°C.

aerospacestructural

Compliance & Regulations

?EAR?Conflict Free?RoHS?REACH?TSCA?Prop 65

AZ91E Magnesium/AZ91E Magnesium T6

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Property	Value	Unit	Conditions
Compressive Modulus(Ec)	44.82	GPa	22°C · Sand casting
Compressive Yield Strength(Fcy)	82.74	MPa	22°C · Sand casting · T6 · AMS 4446
Poisson's Ratio(ν)	0.3500	-	22°C
Shear Modulus(G)	16.55	GPa	22°C · Sand casting
Ultimate Tensile Strength(σUTS)	117.2	MPa	22°C · Sand casting · T6 · AMS 4446
Yield Strength (0.2% offset)(σy)	82.74	MPa	22°C · Sand casting · T6 · AMS 4446
Young's Modulus(E)	44.82	GPa	22°C · Sand casting

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	1.805	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Regulatory Screening

Environmental

Export Control

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.

AZ91E Magnesium T6

Mechanical Properties

Physical Properties

Regulatory Screening

Environmental

Export Control