AsPd2Rh
ceramic· JVASP-75728· AsPd2Rh
AsPd2Rh is an intermetallic compound composed of arsenic, palladium, and rhodium, classified as a ceramic material despite its metallic constituents. This is a research-phase compound studied primarily for its potential in high-performance applications requiring combined thermal stability and mechanical strength. The material family is notable in materials science for exploring novel intermetallic phases that may offer alternatives to traditional alloys in extreme environments, though industrial adoption remains limited pending further characterization and scalability demonstration.
intermetallic research compoundshigh-temperature structural applicationscatalytic substrate materialsaerospace component researchelectronic contact materialsexperimental phase studies
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Bulk Modulus(K) | 168.7 | GPa | — | ||
Poisson's Ratio(ν) | 0.2700 | - | — | ||
Shear Modulus(G) | 5.340 | GPa | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 10.65 | kg/m³ | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Band Gap(Eg) | 0.000 | eV | — | ||
Magnetic Moment(μB) | 0.000 | µB | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Energy Above Hull(ΔEhull) | 0.2177 | eV/atom | — | ||
Formation Energy(ΔHf) | -0.08975 | eV/atom | — |
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.