5Cr-Mo-V is a chromium-molybdenum-vanadium alloy steel used in aircraft landing gear, fasteners, and structural components requiring high strength and fatigue resistance at ambient temperatures. The Q&T (quenched and tempered) condition delivers tensile strengths typically in the 1,400–1,900 MPa range with good fracture toughness and fatigue performance, making it suitable for highly stressed aerospace applications where weight efficiency and reliability are critical.
Compliance & Regulations
26 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Ultimate Bearing Strength(Fbru)4 entries | Curve (9 pts) | Pa | — | ||
| ↳ | Curve (9 pts) | Pa | — | ||
| ↳ | Curve (10 pts) | Pa | — | ||
| ↳ | Curve (10 pts) | Pa | — | ||
Bearing Yield Strength(Fbry)4 entries | Curve (10 pts) | Pa | — | ||
| ↳ | Curve (10 pts) | Pa | — | ||
| ↳ | Curve (10 pts) | Pa | — | ||
| ↳ | Curve (11 pts) | Pa | — | ||
Compressive Modulus(Ec)2 entries | 206.8 | GPa | 22°C · Bar/Forging | ||
| ↳ | Curve (14 pts) | Pa | L | ||
Compressive Yield Strength(Fcy)4 entries | Curve (9 pts) | Pa | L | ||
| ↳ | Curve (9 pts) | Pa | L | ||
| ↳ | Curve (11 pts) | Pa | L | ||
| ↳ | Curve (10 pts) | Pa | L | ||
Poisson's Ratio(ν) | 0.3600 | - | 22°C | ||
Shear Modulus(G) | 75.84 | GPa | 22°C · Bar/Forging | ||
Ultimate Shear Strength(Fsu)4 entries | Curve (9 pts) | Pa | — | ||
| ↳ | Curve (9 pts) | Pa | — | ||
| ↳ | Curve (11 pts) | Pa | — | ||
| ↳ | Curve (11 pts) | Pa | — | ||
Ultimate Tensile Strength(σUTS)4 entries | Curve (9 pts) | Pa | L | ||
| ↳ | Curve (10 pts) | Pa | L | ||
| ↳ | Curve (10 pts) | Pa | L | ||
| ↳ | Curve (9 pts) | Pa | L | ||
Yield Strength (0.2% offset)(σy)4 entries | Curve (8 pts) | Pa | L | ||
| ↳ | Curve (9 pts) | Pa | L | ||
| ↳ | Curve (9 pts) | Pa | L | ||
| ↳ | Curve (9 pts) | Pa | L | ||
Young's Modulus(E)2 entries | 206.8 | GPa | 22°C · Bar/Forging | ||
| ↳ | Curve (13 pts) | Pa | L |
2 interactive curves for this material
Stress-strain, S-N fatigue and environmental knockdown curves are free with an account.
Create free account| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (7 pts) | 1/K | — | ||
Thermal Conductivity vs Temperature(k(T)) | Curve (7 pts) | W/(m·K) | — |
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | 7.778 | kg/m³ | 22°C |