2025 Aluminum T6
Verifiedmetal2025 aluminum alloy (Cu-Mg primary alloying elements) is a heat-treatable aerospace alloy used in aircraft structural components requiring high strength-to-weight ratio; T6 temper (solution heat-treated and artificially aged) provides yield strengths in the 50-57 ksi range with moderate elongation, suitable for die-forged critical aircraft parts operating at room temperature with good fatigue resistance.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
Orientation
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Die forging | — | |
Elongation at Break(εf)2 entries | — | - | 22°C · Die forging · T6 · AMS 4130 · L · t=≤4.000 in | — | |
| ↳ | — | - | 22°C · Die forging · T6 · AMS 4130 · LT · t=≤4.000 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Die forging | — | |
Ultimate Tensile Strength(σUTS)2 entries | — | Pa | 22°C · Die forging · T6 · AMS 4130 · L · t=≤4.000 in | — | |
| ↳ | — | Pa | 22°C · Die forging · T6 · AMS 4130 · LT · t=≤4.000 in | — | |
Yield Strength (0.2% offset)(σy)2 entries | — | Pa | 22°C · Die forging · T6 · AMS 4130 · L · t=≤4.000 in | — | |
| ↳ | — | Pa | 22°C · Die forging · T6 · AMS 4130 · LT · t=≤4.000 in | — | |
Young's Modulus(E) | — | Pa | 22°C · Die forging | — |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (7 pts) | 1/K | — | — |
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.