2024 Aluminum T4
metalUNS A92024
2024 Aluminum T4 is a copper-aluminum alloy in solution heat-treated and naturally aged condition, providing tensile strength of approximately 70 ksi (485 MPa) with good fatigue resistance and machinability, commonly used in aircraft fuselage skin, wing structures, and high-stress fasteners where moderate strength and damage tolerance are required. The T4 temper offers superior fracture toughness compared to the overaged T3 condition, though with slightly lower strength, making it the preferred specification for critical aerospace structures subject to fatigue and impact loading.
aerospacestructural
Compliance & Regulations
?Conflict Free?FDA?RoHS?REACH?TSCA?Prop 65
Filter by
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | — | Pa | 22°C · Drawn tubing | — | |
Compressive Tangent Modulus vs Stress(Etn(σ)) | Curve (9 pts) | Pa | 21°C · L | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Drawn tubing | — | |
S–N Curve (Wöhler)(S–N) | — | Pa | 49 entriesClick to expand | ||
Stress–Strain Curve (buckling region, ≤ 2% strain)(σ–ε (low-strain))2 entries | Curve (7 pts) | Pa | 21°C · L | — | |
| ↳ | Curve (7 pts) | Pa | 21°C · L | — | |
Torsional Modulus of Rupture vs D/t(Fst(D/t)) | Curve (5 pts) | Pa | 21°C | — | |
Ultimate Tensile Strength(σUTS) | Curve (20 pts) | Pa | L | — | |
Young's Modulus(E) | — | Pa | 22°C · Drawn tubing | — | |
N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form / heat treatment / basis.
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (12 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (11 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (15 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Safety & Biocompatibility
Quality & Standards
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.