17-4PH Stainless Steel H1150M
Verifiedmetal17-4PH is a precipitation-hardened martensitic stainless steel (Fe-Cr-Ni-Cu-Nb) used in high-strength aerospace and power generation applications, offering exceptional strength-to-weight ratio and corrosion resistance up to approximately 300°C. The H1150M condition is solution-annealed at 1150°F followed by controlled aging, providing optimized strength and fracture toughness balance for critical rotating components and fasteners per AMS 5643.
aerospacestructural
Compliance & Regulations
?Conflict Free?RoHS?REACH?TSCA?Prop 65
Filter by
Form
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Compressive Modulus(Ec) | Curve (10 pts) | Pa | — | — | |
Elongation at Break(εf) | — | - | 22°C · Bar · H1150M · AMS 5643 · L · t=<8.000 in | — | |
Poisson's Ratio(ν) | — | - | 22°C | — | |
Shear Modulus(G) | — | Pa | 22°C · Investment Casting | — | |
Ultimate Tensile Strength(σUTS) | — | Pa | 22°C · Bar · H1150M · AMS 5643 · L · t=<8.000 in | — | |
Yield Strength (0.2% offset)(σy) | — | Pa | 22°C · Bar · H1150M · AMS 5643 · L · t=<8.000 in | — | |
Young's Modulus(E) | — | Pa | 22°C · Sheet/Strip/Plate | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
CTE vs Temperature(α(T)) | Curve (13 pts) | 1/K | — | — | |
Specific Heat vs Temperature(Cp(T)) | Curve (17 pts) | J/(kg·K) | — | — | |
Thermal Conductivity vs Temperature(k(T)) | Curve (17 pts) | W/(m·K) | — | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
| Property | Value | Unit | Conditions | Source | |
|---|---|---|---|---|---|
Density(ρ) | — | kg/m³ | 22°C | — |
Rows with are inherited from the base material
Verified Unverified Low confidence (<80%) Link to source
Regulatory Screening
Environmental
Quality & Standards
Industry-Specific
RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.