17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH) — Properties & Data | MatWorld

17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH)

UNS S17400· Ultrafuse 17-4 PH

BASF Forward AM Ultrafuse 17-4 PH is a filament of 17-4PH stainless steel powder in a polymer binder, printed by material extrusion and then converted into a solid steel part. The printed green part must be catalytically debound and sintered, and it shrinks during sintering, so it is printed oversized to compensate. The sintered steel retains some porosity and a layered surface, and its properties can vary between build directions; functional surfaces are often machined, and parts can be precipitation hardened like the wrought alloy. It is used for jigs, fixtures, tooling, functional prototypes and low-volume metal parts made without a powder-bed system. Every value on this page is read from BASF Forward AM's own material data sheet — quoted, cited and dated — and is the maker's statement about printed material, not a measurement by MatWorld; none has yet been reviewed by a person.

jigsfixturestoolingfunctional prototypeslow-volume metal parts

Compliance & Regulations

?UL 94?ITAR?EAR?ISO 10993?Conflict Free?FDA?RoHS?REACH

17-4PH Stainless Steel (FDM)/17-4PH Stainless Steel (FDM, BASF Forward AM Ultrafuse 17-4 PH)

Units:

si imperial

Property OverviewNormalized to typical max values

Filter by

Orientation

Specification

Property	Value	Unit	Conditions
Elongation at Break(εf)2 entries	4.000	%	ISO 6892 - 1 · XY
↳	4.000	%	ISO 6892 - 1 · Z
Hardness (Vickers)(HV)	291	HV	ISO 6507 - 1 · XY
Ultimate Tensile Strength(σUTS)2 entries	990.0	MPa	ISO 6892 - 1 · XY
↳	1.004	GPa	ISO 6892 - 1 · Z
Yield Strength (0.2% offset)(σy)2 entries	756.0	MPa	ISO 6892 - 1 · XY
↳	764.0	MPa	ISO 6892 - 1 · Z
Young's Modulus(E)2 entries	191.0	GPa	ISO 527 · XY
↳	195.0	GPa	ISO 527 · Z

N entriesMultiple entries per property — large groups are collapsed; click a summary row to expand. Use filters above to narrow by form, heat treatment, basis, or test environment.

Verified Unverified Low confidence (<80%) Link to source

Property	Value	Unit	Conditions	Source
Density(ρ)	7.806	kg/m³	22°C

Rows with are inherited from the base material

Verified Unverified Low confidence (<80%) Link to source

Reference data from cited sources. Not verified or certified by MatWorld Inc. Verify against the source before use in design. Terms: engineering data

Regulatory Screening

Environmental

Export Control

Safety & Biocompatibility

Quality & Standards

Industry-Specific

RoHS, REACH, and Prop 65 statuses are validated against official substance lists (ECHA SVHC Candidate List, OEHHA Prop 65, RoHS Annex II). Other regulations are estimated from composition and material classification. All screening is a starting point for due diligence — always verify with your supplier before making compliance decisions.